Sand & Gravel Vibrating Screen mesh Inside Reinforced Formed Hook Strips
Screens for classifying, sizing, straining, sieving, are typically
secured to a vibrating deck by clamping rails that apply tension
across the screening surface. The tension is applied through edge
treatments on the woven wire cloth screen panel commonly referred
to as "hooks" , "hook strips" or "hooking strips".
Proper screen tension is crucial for effective screening and longer
Banded edges prevent flattening of hook edges and eliminate mesh
pull-out on fine wire mesh or high tension screens.
Inside Reinforced Formed Edge
This hook strip is utilized for screens 5/16" and larger wire
diameters. Edges are annealed before forming to eliminate cracking
When ordering screen edge preparations, give vertical height of
hook (H) and angle of formed edge (A).
Standard hook length (L) is 1".
Standard hook height (H) is 3/4".
Standard angle is 45° - 65°